General Information

Distributor:

  Jo Philipps
Kemiko Northwest
J. Philipps & Associates, LLC
6663 SW Beaverton-Hillsdale Hwy. Suite 242
Portland, Or. 97225

Phone: 503-296-7756

Fax:  503-291-1753


Concrete Staining—Application Crew for commercial or residential projects
We specialize in decorative concrete floors, existing and new concrete slabs. Our application will provide an attractive, clean living atmosphere, and always unique! Concrete staining is economical and easy to maintain. We take a hands-on, personal approach to every job.

Stone Tone Stain
Kemiko Stone Tone Stains are not paint, not a pigment or coating stain. The staining process will create a natural stone or mottled appearance. They react with the concrete to form permanent, long lasting colors that will not fade, chip, or peel. The stains are made from an acid solution, wetting agents and metallic ions, and this stain when mixed with water reacts (chemically combines) with the free-lime in concrete to form permanent, long lasting colors. These stains actually react with the cement particles and last as long as the surface they have been applied to. Because this is not an exact pigmented coloring technique, the results cannot be guaranteed. The product is guaranteed to be manufactured properly. Stains are best applied with an all-plastic, garden-type pump up sprayer.

Application: 400-sq. ft. per gallon when applying the mixture twice.
CAUTION—HIGHLY CORROSIVE

back to top

Stone Tone Wax
Kemiko Wax is designed for use on porous exterior and interior surfaces that are unaffected by contact with mineral spirits, such as new and old concrete, unglazed brick and tile, flagstone and unsealed wood. Wax enhances the depth and color and provides surface protection. The wax is water and dirt resistant. Wax is best applied with a slow speed (175 RPM) floor machine, a natural, stiff bristle brush (Palmyra) attachment and a natural medium bristle brush (Tampico) attachment for buffing. A white pad can be used as the third step for increase shine.

Application: 250 – 300 sq. ft. per gallon depending on the porosity of the surface.
CAUTION -- FLAMMABLE

back to top

Stone Tone Sealer (Non-Yellowing Clear Coating)
This is a high solids (30%) water base, Acrylic Urethane sealer designed to provide protection and easy maintenance to Stone Tone Stained concrete or other surfaces requiring a durable, clear coating. It is designed for interior and exterior use and is non-yellowing and resistant to blush. Stone Tone Sealer provides a natural looking satin finish to surfaces requiring a durable clear coating. It is suggested two thin coats be applied instead of one thick coat. The surface dries in 2-3 hours, however, heavy traffic should be avoided for 24 hours and washing avoided for 48 hours. Sealers are best applied with commercial conventional air spray or airless spray equipment utilizing spray gun tip size between .013” - .015”.

Application: 300 to 400 sq. ft. per gallon
CAUTION - COMBUSTIBLE

back to top

Additional Concrete Sealant Products
Exterior and Interior application
These sealants are chemical resistant, highly wear resistant, and environmentally safe. Available for commercial and residential use.
Coverage and prices vary. Our technical personnel will be pleased to provide you with additional information.

Samples: (Of all products) – May be purchased as follows:

¼ pint = $9.95 ½ pint = $12.95 Pint = $14.95 Quart = $19.95

 

Instructional Video available for $18.95, plus shipping.

back to top

Shipping & Handling
Kemiko Products are classed as hazardous materials. Shipping and handling costs vary from $25.00 - $125.00, and they are based primarily on quantity and destination. They become more costly when shipped United Parcel, as U.P.S. requires gallons to be broken down into liter bottles, creating added expense. U.P.S. still may cost less than a regular freight company; however, we will always attempt to find the least expensive carrier to deliver your product.

back to top

Return Policy
We will accept returned product as long as it is unopened and as long as the product is returned within 30 days from invoice date. A 20% restocking fee will be deducted from any refund.

back to top

Warranty
The following warranty is made in lieu of all other warranties, either expressed or implied. These products are manufactured of selected raw materials by skilled technicians. Neither seller nor manufacturer has any knowledge or control concerning the purchaser’s use of the products and no warranty is made as to the results of any use. The only obligation of either seller or manufacturer shall be to replace any quantity of these products proved to be defective. Any claim of defective product must be received in writing within one (1) year from the date of shipment. Neither seller nor manufacturer assumes any liability for injury, loss, or damage resulting from the use of these products.

back to top

HAZARDOUS MATERIALS – KEEP OUT OF REACH OF CHILDREN