|
STONE TONE STAIN
Kemiko Stone Tone
Concrete Stain creates a stunning natural stone appearance.
Rich mottling effects are achieved from an acid base
solution, wetting agents, and metallic ions. When combined
with water, the stain reacts with minerals already present
in the concrete to produce an intense decorative permanent
color that will not fade, chip, or peel. For the best
application an all-plastic, garden type pump-up sprayer is
required. Due to the nature of a chemical reaction, results
can not be guaranteed. The product is guaranteed to be
manufactured properly.
Coverage: 400 sq. ft. per gallon when applying recommended
two applications.
CAUTION-HIGHLY-CORROSIVE
back to top
NEUTRA CLEAN
Kemiko Neutra
Clean is an industrial strength, high performance water base
sodium metasilicate cleaner for the preparation of bare
concrete and coated substrates. Neutra Clean is a water
viscosity, single component product with a pleasant citrus
odor that does not contain any hazardous solvents, is
concentrated and diluted with water, and prepares the
surface for staining, sealing, and recoating. Neutra Clean
replaces the baking soda component used to neutralize the
acid prior to sealing or waxing. Neutra
Clean is applied with commercially available pressure
sprayers, steam cleaners, or simply poured onto floor and
worked into the surface with a stiff bristle brush or floor
machine.
Coverage: 500-2,000 sq. ft. per gallon – per application
back to top
STONE TONE WAX II (Buff on/Water-borne)
Kemiko Wax is designed for use on porous surfaces (primarily
interior) that are unaffected by contact with mineral
spirits, such as new and old concrete, unglazed brick and
tile, flagstone and unsealed wood. Wax enhances the depth of
color and provides surface protection. The wax is water and
dirt resistant. Wax is best applied with a slow speed (175
RPM) floor machine, a natural, stiff bristle brush (Bassine)
attachment and a natural medium bristle brush (Palmyra,
Union Mix, or Tampico) attachment for buffing.
Coverage: 250-350 sq. ft. per gallon depending upon the
porosity of the surface.
back to top
STONE TONE WAX (Solvent Based)
Kemiko Wax is designed for use on porous surfaces (primarily
interior) that are unaffected by contact with mineral
spirits, such as new and old concrete, unglazed brick and
tile, flagstone and unsealed wood. Wax enhances the depth of
color and provides surface protection. The wax is water and
dirt resistant. Wax is best applied with a slow speed (175
RPM) floor machine, a natural, stiff bristle brush (Bassine)
attachment and a natural medium bristle brush (Palmyra,
Union Mix, or Tampico) attachment for buffing.
Coverage: 250-350 sq. ft. per gallon depending upon the
porosity of the surface.
CAUTION-COMBUSTIBILE
back to top
STONE TONE SEALER II
Kemiko Stone Tone Sealer is a high solids (30%) water base
Acrylic Urethane Sealer. It is designed for interior and
exterior use with excellent wear qualities. Stone Tone
Sealer provides a natural looking satin finish to surfaces
requiring a durable clear coating without non-yellowing
appearance. It is suggested two thin coats be applied
instead of one thick coat. The surface dries in 2-3 hours;
however, heavy traffic should be avoided for 24 hours and
washing avoided for 48 hours. Stone Tone Sealer is available
in ‘Flat’ which provides a matte finish or ‘Gloss’ which
provides a shiny finish. Sealers are best applied with
conventional commercial air spray or airless spray equipment
utilizing spray gun tip size between .013”-.015”; however,
professional pump-up sprayers, rollers, lambs wool and
micro-fiber pads are optional application methods for
trained professionals.
Coverage: 300-400 sq. ft. per gallon depending upon porosity
of the surface.
back to top
KEMIKO EASY SHINE MOP-ON WAX
Kemiko’s Easy Shine Wax is a water-based acrylic polymer
mop-on floor finish formulated to protect and minimize the
scratching of Kemiko and Sta-Crete sealers. This maintenance
product can be applied by spraying or pouring on the surface
and massaging in a figure eight motion onto the floor with a
micro-fiber pad. A minimum of two coats are recommended and
the drying time is 20-30 minutes. Easy Shine Mop on Wax is
available in a gloss or satin finish.
Coverage: 1,500-2000 sq. ft. per gallon
back to top
KEMIKO EASY STRIP
A biodegradable and high performance water base
concentrated wax stripper. Easy Strip is designed for easy
removal of Kemiko Stone Tone and Easy Shine waxes. Not a
hazardous product.
Coverage: 200-500 sq ft per gallon, per application
back to top
KEMIKO STA-NATURAL WATER REPELLENT
Sta-Natural is a 0 VOC, extremely user-friendly silane/siloxane
emulsion for sealing concrete and cementitious substrates.
It is designed to repel water, reduce efflorescence and
allows the substrate to breathe. It is resistant to UV and
high alkalinity exposure. Sta-Natural is applied to properly
prepared, stained or bare exterior concrete by spary,
roller, or brush.
Coverage: 80-150 sq. ft. per gallon, greatly dependent upon
porosity of the substrate.
back to top
Additional
Concrete Sealant Products
Exterior and Interior application
These sealants are chemical resistant, highly wear
resistant, and environmentally safe. Available for
commercial and residential use.
Coverage and prices vary. Our technical personnel will be
pleased to provide you with additional information.
Kemiko SS1202 -
View
Information
Kemiko SS1600 -
View
Information
Kemiko SS2700 -
View
Information
Kemiko
SS3700 Clear -
View
Information
Kemiko
SS3700 Satin-
View
Information
Seal
Pro Sealants
Seal Pro
MS300 - View
Information
Seal Pro 600 -
View
Information
Samples: May be purchased as
follows:
¼ pint = $10.95 ½ pint = $12.95 Pint = $15.95 Quart = $22.95
Instructional Video available for $18.95, plus shipping
Instructional DVD available for $25.95, plus shipping
back to top
Shipping & Handling
Some Kemiko Products are classed as ‘Hazardous Materials’.
Shipping and handling costs will vary. This is primarily on
product, quantity, shipper, and destination. UPS may cost
less than a regular freight company. We will always attempt
to find the least expensive carrier to deliver your
products. Please request a quote if a precise rate is
required.
back to top
Return Policy
We will accept returned product as long as it is unopened
and as long as the product is returned within 30 days. A 20%
restocking fee will be deducted from any refund.
back to top
Warranty
The following warranty is made in lieu of all other
warranties, either expressed or implied. These products are
manufactured of selected raw materials by skilled
technicians. Neither seller nor manufacturer has any
knowledge or control concerning the purchaser’s use of the
products and no warranty is made as to the results of any
use. The only obligation of either seller or manufacturer
shall be to replace any quantity of these products proved to
be defective. Any claim of defective product must be
received in writing within one (1) year from the date of
shipment. Neither seller nor manufacturer assumes any
liability for injury, loss, or damage resulting from the use
of these products.
back to top
HAZARDOUS MATERIALS – KEEP OUT OF REACH
OF CHILDREN Telephone: (503)
627-0111 Fax: (503) 627-0400
E-mail:
jo@kemikostain.com Website:
www.kemikostain.com
_________________________________________________
We are the sole owners of the information collected on this
site. We only have access to/collect information that you
voluntarily give us via email or other direct contact from
you. We will not sell or rent this information to anyone.
We will use your information to respond to you, regarding
the reason you contacted us. We will not share your
information with any third party outside of our
organization, other than as necessary to fulfill your
request, e.g. to ship an order.
Unless you ask us not to, we may contact you via email in
the future to tell you about specials, new products or
services, or changes to this privacy policy. |
